**************************************************************************** ********************* D720200A Design Resources Release ******************** **************************************************************************** Release Note June 15.2012 Renesas Electronics uPD720200A USB3.0 Host Controller Firmware Version : 4.0.2.0 : June 15th, 2012 Copyright (C) 2010-2012 Renesas Electronics Corporation All Rights Reserved **************************************************************************** --------------------------------------------------------------------------- Table of Contents --------------------------------------------------------------------------- 1. Release Files 2. History --------------------------------------------------------------------------- 1. Release Files --------------------------------------------------------------------------- Date Time Size File Name Version 2012/06/14 21:43 32KB F402003.MEM 4.0.2.0 --------------------------------------------------------------------------- 2. History --------------------------------------------------------------------------- --------------------------------------------------------------------------- Version 4.0.2.0 : June 15th, 2012 --------------------------------------------------------------------------- - The following problems are fixed. 1. Fixed the USB3.0 Host Controller in D3hot didn't send the PME Message when it received any wakeup events. 2. The following issue is fixed by ver 2.1.19.0 of RENESAS USB 3.0 Host Controller Driver, but there was a possibility that this could still occur in Windows 8: [RENSAS USB 3.0 Host Controler Driver ver 2.1.19.0's history] 1. USB3.0 devices aren't detected when users perform the below steps. a) Turn on a PC. b) Enter sleep (S3 state) without connecting USB3.0 devices. c) Connect USB3.0 devices to a USB3.0 port during S3 state. d) USB 3.0 HDD isn't detected. The USB3.0 devices aren't detected after the PC resumes from S3 state. With Windows 7 or earlier, this issue only occurs with driver Ver.2.1.16.0. 3. There is a possibility that the USB 3.0 Host controller cannot notify the xHCI Driver when the Host controller receives the following contiguous Device Notification Transaction Packets: Function Wake Notification, Latency Tolerance Message (LTM) Device Notification, Bus Interval Adjustment Message Device Notification. We have never seen this problem on a real system. 4. Improved the interoperability of UAS devices in Windows 8. 5. The following issue is fixed by ver 2.1.19.0 of RENESAS USB 3.0 Host Controller Driver, but there was a possibility that this issue could still occur in Windows 8: [RENSAS USB 3.0 Host Controler Driver ver 2.1.19.0's history] 2. There is a possibility of bluescreen caused by Hot-Plug operation of a USB3.0 Hub connecting USB3.0 devices. With Windows 7 or earlier, this issue only occurs with Ver 2.1.16.0. 6. Failed the TD7.3 of Link Layer test by using Ellisys Version : 2.0.4210 and Lecroy Version F 1.35 Build107 or later. This issue arose from changing the Link Layer test specification. --------------------------------------------------------------------------- Version 4.0.1.5 : September 7th, 2010 --------------------------------------------------------------------------- - First Release for MP. - uPD720200A with this FW is certified by USB-IF. To get USB-IF system certification for the product with the uPD720200A, this FW or later version should be used. --------------------------------------------------------------------------- Version 4.0.1.2 : June 11th, 2010 --------------------------------------------------------------------------- - First Release for ES Sample. ---------------------------------------------------------------------------