**************************************************************************** ***************** D720201 & D720202 Design Resources Release *************** **************************************************************************** Release Note June 15.2012 Renesas Electronics D720201 & uPD720202 USB3.0 Host Controller Firmware Version : 2.0.1.3 :June 15th, 2012 Copyright (C) 2011-2012 Renesas Electronics Corporation All Rights Reserved **************************************************************************** Note : This firmware is for the following devices. - uPD720201 ES 2.0 sample whose revision ID (in the PCI Configuration Register) is 2h. - uPD720201 ES 2.1 sample & CS sample & Mass product whose revision ID (in the PCI Configuration Register) is 3h. - uPD720202 ES 2.0 sample & CS sample & Mass product whose revision ID (in the PCI Configuration Register) is 2h. --------------------------------------------------------------------------- Table of Contents --------------------------------------------------------------------------- 1. Release Files 2. History --------------------------------------------------------------------------- 1. Release Files --------------------------------------------------------------------------- Date Time Size File Name Version 2012/06/15 13:10 12KB K2013080.mem 2.0.1.3 --------------------------------------------------------------------------- 2. History --------------------------------------------------------------------------- --------------------------------------------------------------------------- Version 2.0.1.3 : June 15, 2012 --------------------------------------------------------------------------- - The following problems are fixed. 1. There is a possibility that the USB 3.0 Host controller cannot notify the xHCI Driver when the Host controller receives the following contiguous Device Notification Transaction Packets: Function Wake Notification, Latency Tolerance Message (LTM) Device Notification, Bus Interval Adjustment Message Device Notification. We have never seen this problem on a real system. 2. Improved the interoperability of UAS devices in Windows 8. 3. The yellow bang comes up on RENESAS USB 3.0 Host Controller in the device manager after the ver 2.0.1.1 or older FW is written by using "Serial ROM Write Tool for Windows" without Power On Reset process. This issue doesn't occur when the Serial ROM is blank. 4. There is a possibility that a Debug host cannot detect the target by hot-plug when UPD720201/202 is the debug target in Windows 8. - Tuned the firmware to improve performance of DebugPort Transfer in Windows 8. - Additional remediation was implemented for the following ver 2.0.0.6 issue: [ver 2.0.0.6's history, item 3] 3. Modified the problem that xHC cannot process any commands when USB 3.0 Host controller serves as the debugport. -The following issue, which depends on a specific device, was fixed 1. There is a possibility that USB 3.0 HDD (IO-DATA HDJ-UT2.0) is disconnected and isn't re-connected after executing a data transfer and S3->resume. --------------------------------------------------------------------------- Version 2.0.1.1 : March 12, 2012 --------------------------------------------------------------------------- - The following problems are fixed. 1. When the following devices are connected with a High-Speed HUB in the device tree for the USB3.0 host controller, there is a possibility of failing to schedule split transactions. This causes all of the devices in the topology to fail further communication with the host. [Conditions] 1. Devices having one or more Full-Speed ISO (isochronous) endpoint 2. Devices having one or more Full-Speed or Low-Speed INT endpoint 3. Total of the maximum packet size of each endpoint of condition 1 and 2 exceeds 564bytes. 2. When debug port function is running in Windows 8 and hot-plug is done between host system and target system, the yellow bang comes up on the debug port driver in the Device Manager of Windows 8. 3. When the BlockingEvent function (added in xHCI1.0) is used in the device driver of Windows 8 or other O/S, there is a possibility that ISO data transfers stop. This problem does not occur when the Renesas Electronics device driver is used. --------------------------------------------------------------------------- Version 2.0.1.0 : February 1, 2012 --------------------------------------------------------------------------- - Modified the FW structures for FW download function. There is a possibility that the yellow bang to come up on thegRenesas Electronics USB3.0 host controllerhdriver in the device manager of the Windows OS, or xHCI driver in the system bios or other OS halts. The detail of this issue is reported with "Notification and product restriction information Ver 1.0 (IBB-NK1-110007)". This problem does not occur when the FW is loaded from a Serial ROM. --------------------------------------------------------------------------- Version 2.0.0.6 : October 24, 2011 --------------------------------------------------------------------------- 1. Modified the problem that a yellow bang appears in Device Manager Windows OS when the PC boots without connecting USB devices into the USB3.0 port, or the USB3.0 host controller drivers are disabled and enabled in Device Manager. 2. Modified the problem that can cause the StopEndpoint command time-out error. 3. Modified the problem that cannot process the any commands when USB 3.0 Host controller behaves as the debugport. 4. Modified the problem that cannot detect a USB 2.0 devices when USB 3.0 Host controller drivers are disable and enable in device manager with connecting a USB 2.0 Device into USB3.0 port. 5. Changed the value of PSIC of xHCI Suuported Protcol Capability register. 6. Changed the PHY parameters. --------------------------------------------------------------------------- Version 2.0.0.3 : September 8, 2011 --------------------------------------------------------------------------- - First Release for uPD720201/uPD720202 ES 2.0 sample & CS sample & Mass product whose revision ID of PCI Configuration Register is 2h. ---------------------------------------------------------------------------